Hello Guest it is October 19, 2019, 09:07:11 AM

Author Topic: My home build machine  (Read 393 times)

0 Members and 1 Guest are viewing this topic.

My home build machine
« on: March 17, 2019, 02:40:39 PM »
I am 59, a retired carpenter finding a hobby

My home build CNC with Nema 34 motors.

Check out the pics attached.

I new nothing about CNC and jumped right in.

I needed simple learning curves and this is what i found. I am enjoying every minute of it.

lumber60
« Last Edit: March 19, 2019, 08:18:19 AM by Tweakie.CNC »
pics
« Reply #1 on: March 17, 2019, 02:45:03 PM »
Trying to attach pics.

Offline Tweakie.CNC

*
  • *
  •  7,950 7,950
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: pics
« Reply #2 on: March 18, 2019, 05:18:14 AM »
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
pics of machine
« Reply #3 on: March 18, 2019, 02:44:32 PM »
OK
« Last Edit: March 19, 2019, 02:56:37 AM by Tweakie.CNC »
Re: pics of machine
« Reply #4 on: March 18, 2019, 02:55:02 PM »
Hi,
kool. You have worked out how to attach a pic.

Next time try using Paint or some such program to resize the photo. Your pic is so big that you have to scan around
to see it all. It conveys more info if it were reduced in size so you don't have to scroll back and forth.
Generally its considered that 600kB should be the maximum size of any single attached file and in most cases
that works out to pics in the region of 700 x 500 pixels.

Craig
My wife left with my best friend...
     and I miss him!

Offline Tweakie.CNC

*
  • *
  •  7,950 7,950
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: My home bulid machine
« Reply #5 on: March 19, 2019, 03:01:15 AM »
Hi  Lumber60,

I have resized your picture as per Craig's recommendations.
It may help if you read this thread;   https://www.machsupport.com/forum/index.php?topic=24585.0
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: My home bulid machine
« Reply #6 on: March 19, 2019, 06:42:31 AM »
Thanks for the info!!
I will give it a shot with some more pics.

800 x 600 got it

Thanks again for your support

lumber60
my home built machine
« Reply #7 on: March 19, 2019, 06:54:04 AM »
I think this will work. I resized it in paint

lumber60

Offline Tweakie.CNC

*
  • *
  •  7,950 7,950
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: My home bulid machine
« Reply #8 on: March 19, 2019, 08:17:23 AM »
Excellent  ;)

Nice looking machine.
« Last Edit: March 19, 2019, 08:19:40 AM by Tweakie.CNC »
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: My home build machine
« Reply #9 on: March 20, 2019, 04:46:43 PM »
Thanks,
I found build your own CNC plans on line, modified as i went along due to variations in plan and not really detailed. Hoped for the best and that is how it turned out. I new nothing about it when i started!!

Thanks again,

lumber60