Hello Guest it is May 24, 2019, 01:34:18 PM

Author Topic: I built the machine, but it is not communicating  (Read 226 times)

0 Members and 1 Guest are viewing this topic.

I built the machine, but it is not communicating
« on: March 16, 2019, 11:40:26 AM »
I built the machine, but it is not communicating between the STB5100 controller and computer, Mach3 program.
The driver for the card is in the computer, what am I missing?

Offline ger21

*
  • *
  •  6,233 6,233
    • View Profile
    • The CNC Woodworker
Re: I built the machine, but it is not communicating
« Reply #1 on: March 16, 2019, 03:24:35 PM »
Is the .dll for the card in the Mach3\plugins folder?
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: I built the machine, but it is not communicating
« Reply #2 on: March 16, 2019, 09:23:26 PM »
Hi, not sure where the .dll file is. Thanks for telling me about it. I will try to figure it out.
Re: I built the machine, but it is not communicating
« Reply #3 on: March 16, 2019, 10:03:54 PM »
I don't know driver name. STB5100 USB Motion Card
Re: I built the machine, but it is not communicating
« Reply #4 on: March 16, 2019, 10:23:00 PM »
Hi,
the plugin (.dll file) should have been provided with the board when you bought it. If not ask whom you bought
it off.

Failing that ask the manufacturer of the board......somewhere in China......and good luck with that.....China might
as well be another planet when it comes to getting support for their CNC boards.

Craig
My wife left with my best friend...
     and I miss him!

Offline reuelt

*
  •  444 444
    • View Profile
Re: I built the machine, but it is not communicating
« Reply #5 on: April 04, 2019, 05:33:11 AM »
I built the machine, but it is not communicating between the STB5100 controller and computer, Mach3 program.
The driver for the card is in the computer, what am I missing?
Did You get
1 x CD (Include Instructions, wiring diagrams, software, configuration files, etc.) ?
"the gift of God is eternal life through Jesus Christ our Lord"