Machsupport Forum
General CNC Chat => Building or Buying a Wood routing table.. Beginnners guide.. => Topic started by: thetuxcat on March 16, 2019, 11:40:26 AM
-
I built the machine, but it is not communicating between the STB5100 controller and computer, Mach3 program.
The driver for the card is in the computer, what am I missing?
-
Is the .dll for the card in the Mach3\plugins folder?
-
Hi, not sure where the .dll file is. Thanks for telling me about it. I will try to figure it out.
-
I don't know driver name. STB5100 USB Motion Card
-
Hi,
the plugin (.dll file) should have been provided with the board when you bought it. If not ask whom you bought
it off.
Failing that ask the manufacturer of the board......somewhere in China......and good luck with that.....China might
as well be another planet when it comes to getting support for their CNC boards.
Craig
-
I built the machine, but it is not communicating between the STB5100 controller and computer, Mach3 program.
The driver for the card is in the computer, what am I missing?
Did You get
1 x CD (Include Instructions, wiring diagrams, software, configuration files, etc.) ?