Hello Guest it is May 06, 2025, 01:25:43 PM

Author Topic: Mach 4 crashes within 3-5 minutes of starting a Gcode program  (Read 7234 times)

0 Members and 1 Guest are viewing this topic.

Offline smurph

*
  • *
  •  1,574 1,574
  • "That there... that's an RV."
Re: Mach 4 crashes within 3-5 minutes of starting a Gcode program
« Reply #10 on: February 14, 2019, 04:42:23 PM »
They are on the development version part of the FTP site.  As with any development/beta builds, you need to be extremely careful and test things for your own safety!  Because the development builds haven't gone through the same amount of internal testing as the release builds do. 

ftp://ftp.machsupport.com/Mach4/DevlopmentVersions/

But I will say this...  4088 looks good.  It is definitely a release candidate.   

Steve