I have Little machine shop hi-Torque mini lathe with Pokeys57 controller. For some reason my spindle speed max speed is set at 1000 rpm. I can go into MIDI and shift to spindle Speed to spindle Speed (G97) and increase speed up to 2000 rpm no problem. The CSS (G96) it is limited to 1000 rpm (x axis is at 0). It was working couple weeks ago fine.
I only found one location under mach Configuration spindle tab that had any setting and it is set at 2500 rpm.
Is there another setting somewhere are can some one venture to guess if I have a failure somewhere.
Thank you!