Hello Guest it is March 29, 2024, 09:56:16 AM

Author Topic: LATHE SPINDLE  (Read 886 times)

0 Members and 1 Guest are viewing this topic.

LATHE SPINDLE
« on: January 17, 2019, 06:36:08 PM »
I was thinking of using an AC Servo motor to drive my spindle.The drive is a  Lichuan LCDB2  Drive takes
Input pulse instruction: differential drive/ open collector
Input mode: pulse+direction/Phase A and B orthogonal pulse
/PULSE 2
SIGN 3
/SIGN 1
PULSE 4
Have no Idea what is Plus+ and sig +

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: LATHE SPINDLE
« Reply #1 on: January 18, 2019, 02:29:32 AM »
attached a part of the Manual for the wiring,
you can select the mode via paramater.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.