Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: gabedrummin on January 17, 2019, 06:36:08 PM
-
I was thinking of using an AC Servo motor to drive my spindle.The drive is a Lichuan LCDB2 Drive takes
Input pulse instruction: differential drive/ open collector
Input mode: pulse+direction/Phase A and B orthogonal pulse
/PULSE 2
SIGN 3
/SIGN 1
PULSE 4
Have no Idea what is Plus+ and sig +
-
attached a part of the Manual for the wiring,
you can select the mode via paramater.