Hello Guest it is November 12, 2019, 10:34:53 AM

Author Topic: shape doesnt come out exactly as designed  (Read 241 times)

0 Members and 1 Guest are viewing this topic.

shape doesnt come out exactly as designed
« on: June 25, 2019, 06:46:27 AM »
the router accuracy  looks like this (see picture). I dont have used cutter compensation.  I use a 0.6mm router bit. As far as I know just follow the line (very basic).It turns out dramtically bad.
« Last Edit: June 25, 2019, 08:14:20 AM by Tweakie.CNC »

Offline TPS

*
  •  1,406 1,406
    • View Profile
Re: shape doesnt come out exactly as designed
« Reply #1 on: June 26, 2019, 05:20:28 AM »
Looks like backslash in X/Y axis
anything is possible, just try it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: shape doesnt come out exactly as designed
« Reply #2 on: June 26, 2019, 01:09:43 PM »
Looks like backslash in X/Y axis



I have solved it, it was backslash in the y direction, the coupling to the steppermotor wasnt tight and could move about 1mm