Hello Guest it is March 29, 2024, 11:58:18 AM

Author Topic: G Code incomplete  (Read 1319 times)

0 Members and 1 Guest are viewing this topic.

G Code incomplete
« on: December 27, 2018, 10:36:10 PM »
Hi, I'm new here and new to CNC as well. I have a 4x8 Industrial CNC and Mach3. It was suppose to come with BobCad-CAM but I was never able to set it up. A friend of mine suggested Enroute 4and that's what I installed (Windows 10). It basically works well until I have many shapes. I create the G code but then Mach3 only loads a portion of the code and not all the shapes. So far all of my shapes are just to cut. Am I doing something wrong? or the softwares are not compatible? Please help!

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: G Code incomplete
« Reply #1 on: December 28, 2018, 01:25:50 AM »
Mach3 will only run ~500 lines of Gcode until licensed.  https://www.machsupport.com/software/mach3/

Tweakie.
PEACE
Re: G Code incomplete
« Reply #2 on: December 28, 2018, 12:53:56 PM »
Wow, I didn't realize it was the demo. It was included with my CNC and I thought it was legit since I bought it new.
Thank you so much!