Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: cbocca on December 27, 2018, 10:36:10 PM

Title: G Code incomplete
Post by: cbocca on December 27, 2018, 10:36:10 PM

Hi, I'm new here and new to CNC as well. I have a 4x8 Industrial CNC and Mach3. It was suppose to come with BobCad-CAM but I was never able to set it up. A friend of mine suggested Enroute 4and that's what I installed (Windows 10). It basically works well until I have many shapes. I create the G code but then Mach3 only loads a portion of the code and not all the shapes. So far all of my shapes are just to cut. Am I doing something wrong? or the softwares are not compatible? Please help!

Title: Re: G Code incomplete
Post by: Tweakie.CNC on December 28, 2018, 01:25:50 AM

Mach3 will only run ~500 lines of Gcode until licensed.  https://www.machsupport.com/software/mach3/ (https://www.machsupport.com/software/mach3/)

Tweakie.

Title: Re: G Code incomplete
Post by: cbocca on December 28, 2018, 12:53:56 PM

Wow, I didn't realize it was the demo. It was included with my CNC and I thought it was legit since I bought it new.
Thank you so much!