Hello Guest it is July 08, 2020, 01:36:34 AM

Author Topic: cycle start button also in charge of ENTER  (Read 433 times)

0 Members and 1 Guest are viewing this topic.

cycle start button also in charge of ENTER
« on: September 01, 2018, 01:56:00 AM »
OK I have two buttons on my machine wired in parallel to my BOB that I have established as cycle start via an OEM trigger.  I would also like those buttons to be used instead of the ENTER button/ left click of the mouse.  Anyone see a reason I should not do this?  How should I go about doing this?  I am thinking, maybe put the OEM code for ENTER on that  OEM trigger or is that impossible.  I just want to minimize my use of the keyboard when I am running things.  Or is all this not necessary because the cycle start button already doubles as ENTER?
dich vu chuyen nha quan go vap gia re, cong ty giup viec nha chuyen nghiep, chuyen nha tot nhat

Offline ger21

*
  • *
  •  6,282 6,282
    • View Profile
    • The CNC Woodworker
Re: cycle start button also in charge of ENTER
« Reply #1 on: September 01, 2018, 08:29:03 AM »
The Enter key and Left mouse click are two different things. What do you want the button to do when you press it? By default, it activates the MDI.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html