1. Post the gcode file used in your intial post about drifting.
It should be a text file and is not an xml file. Probably has the ext of (.tap ) .
2. Post your xml file that you are using for you machine. The xml file defines all the parmeters
that will be used by Mach3 on start up. The xml file is located in the main Mach3 directory ie;
plasma.xml.
We will simply review the gcode. Then we can review your xml for how your machine is configured and
provides general understanding about your machine without asking you a lot of questions.
Stay focused..........,
RICH
Gcode as text
N0010 (Filename: Plate with Holes.tap)
N0020 (Post processor: Mach3 plasma.scpost)
N0030 (Date: 01/01/2003)
N0040 G20 (Units: Inches)
N0050 G53 G90 G91.1 G40
N0060 F1
N0070 S500
N0080 (Part: Plate with Holes)
N0090 (Operation: Outside Offset, 0, T100: Plate marker)
N0100 M06 T100 F100.0 (Plate marker)
N0110 G00 Z1.0000
N0120 X6.6757 Y3.0713
N0130 Z0.0000
N0140 M03
N0150 G04 P0.5
N0160 G03 X6.7717 Y2.9753 I0.0960 J0.0000 F100.0
N0170 X6.7717 Y2.9753 I0.0000 J0.9995
N0180 X6.8677 Y3.0713 I0.0000 J0.0960
N0190 M05
N0200 G04 P0.5
N0210 G00 Z1.0000
N0220 X6.6757 Y6.2713
N0230 Z0.0000
N0240 M03
N0250 G04 P0.5
N0260 G03 X6.7717 Y6.1753 I0.0960 J0.0000
N0270 X6.7717 Y6.1753 I0.0000 J0.9995
N0280 X6.8677 Y6.2713 I0.0000 J0.0960
N0290 M05
N0300 G04 P0.5
N0310 G00 Z1.0000
N0320 X6.6757 Y9.4713
N0330 Z0.0000
N0340 M03
N0350 G04 P0.5
N0360 G03 X6.7717 Y9.3753 I0.0960 J0.0000
N0370 X6.7717 Y9.3753 I0.0000 J0.9995
N0380 X6.8677 Y9.4713 I0.0000 J0.0960
N0390 M05
N0400 G04 P0.5
N0410 G00 Z1.0000
N0420 X6.6757 Y12.6713
N0430 Z0.0000
N0440 M03
N0450 G04 P0.5
N0460 G03 X6.7717 Y12.5753 I0.0960 J0.0000
N0470 X6.7717 Y12.5753 I0.0000 J0.9995
N0480 X6.8677 Y12.6713 I0.0000 J0.0960
N0490 M05
N0500 G04 P0.5
N0510 G00 Z1.0000
N0520 X6.6757 Y15.8713
N0530 Z0.0000
N0540 M03
N0550 G04 P0.5
N0560 G03 X6.7717 Y15.7753 I0.0960 J0.0000
N0570 X6.7717 Y15.7753 I0.0000 J0.9995
N0580 X6.8677 Y15.8713 I0.0000 J0.0960
N0590 M05
N0600 G04 P0.5
N0610 G00 Z1.0000
N0620 X6.6757 Y19.0713
N0630 Z0.0000
N0640 M03
N0650 G04 P0.5
N0660 G03 X6.7717 Y18.9753 I0.0960 J0.0000
N0670 X6.7717 Y18.9753 I0.0000 J0.9995
N0680 X6.8677 Y19.0713 I0.0000 J0.0960
N0690 M05
N0700 G04 P0.5
N0710 G00 Z1.0000
N0720 X6.6757 Y22.2713
N0730 Z0.0000
N0740 M03
N0750 G04 P0.5
N0760 G03 X6.7717 Y22.1753 I0.0960 J0.0000
N0770 X6.7717 Y22.1753 I0.0000 J0.9995
N0780 X6.8677 Y22.2713 I0.0000 J0.0960
N0790 M05
N0800 G04 P0.5
N0810 G00 Z1.0000
N0820 X11.8682 Y25.6708
N0830 Z0.0000
N0840 M03
N0850 G04 P0.5
N0860 G03 X11.7722 Y25.5748 I0.0000 J-0.0960
N0870 G01 Y1.5748
N0880 X11.7717 Y1.5743
N0890 X1.7717
N0900 X1.7712 Y1.5748
N0910 Y25.5748
N0920 X1.7717 Y25.5753
N0930 X11.7717
N0940 G03 X11.8677 Y25.6713 I0.0000 J0.0960
N0950 M05
N0960 G04 P0.5
N0970 G00 Z1.0000
N0980 M05 M30