Hello Guest it is July 21, 2019, 09:36:02 AM

Author Topic: MACH3 - STM32 MODBUS TCP help  (Read 398 times)

0 Members and 1 Guest are viewing this topic.

MACH3 - STM32 MODBUS TCP help
« on: August 29, 2018, 09:06:58 AM »
hello dear forum,

I am trying to MODBUS TCP comunicate STM32 with Mach3

I have read the TCP documents in internet and learned
that first of all Mach3 send a TCP SYN message to the STM32

this time I send a SYN-ACK message to Mach3

after this Mach3 must send a ACK message to STM32 - ( according TCP documents )

as you can see in the attached picture



the SYN from Mach3 and SYN-ACK from STM32 is there
(192.168.1.2) PC (192.168.1.110) STM32

however ACK from Mach3 is missing and Mach3 reports "conection timeout"

there is a warning from Wireshark yellow coloured

what does this warning say ? what shall I do next ?

thank you
Re: MACH3 - STM32 MODBUS TCP help
« Reply #1 on: September 04, 2018, 05:24:00 AM »
hello all ,

I have new question

can I ethernet connect Mach3 MODBUS TCP - PC to STM32 via modem router or
is it possible only with crossover cable ?

thank you