Hello Guest it is November 29, 2020, 05:58:30 AM

Poll

stuck my axis when load larg g-code 900.000 lines

g-code problem
0 (0%)
mach3 stuck
0 (0%)

Total Members Voted: 0

Author Topic: large g-code problem on mach3  (Read 3061 times)

0 Members and 1 Guest are viewing this topic.

large g-code problem on mach3
« on: May 31, 2018, 07:02:28 AM »
hello .I have problem with mach3 when load large g-code 900.000 lines. Mach3 is begin slow and when i move axis loosing a lot of steps and stuck, in other smaller g-code files runs without problem , i use a full version on mach3 and i have pc windows7 with intel pentium4 3ghz , memory 3ghz  and graphic card  amd radeon r7 1ghz memory. How to solve the problem? (sorry for bad english) :)

Offline Tweakie.CNC

*
  • *
  •  8,561 8,561
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: large g-code problem on mach3
« Reply #1 on: May 31, 2018, 08:12:55 AM »
As a test try turning off the Toolpath Display (Diagnostics screen) - if your 900,000 line code then runs OK the problem is most likely with your graphics card.

Tweakie.
KEEP SAFE !
Re: large g-code problem on mach3
« Reply #2 on: June 05, 2018, 01:09:31 PM »
thank you very much , the problem is from toolpath, now works fine. :D

Offline Tweakie.CNC

*
  • *
  •  8,561 8,561
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: large g-code problem on mach3
« Reply #3 on: June 06, 2018, 02:15:16 AM »
I am pleased you found the problem.

(Perhaps consider fitting a new Graphics card with 1GB or more memory).

Tweakie.
KEEP SAFE !

Offline ger21

*
  • *
  •  6,287 6,287
    • View Profile
    • The CNC Woodworker
Re: large g-code problem on mach3
« Reply #4 on: June 06, 2018, 11:01:10 AM »
He already has one, according to his first post.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html