Hello Guest it is June 26, 2019, 05:14:39 PM

Author Topic: Feed hold  (Read 456 times)

0 Members and 1 Guest are viewing this topic.

Offline TPS

*
  •  1,305 1,305
    • View Profile
Feed hold
« on: March 16, 2018, 08:57:39 AM »
had a strange Thing today

run a simple Programm for seed Validation

g0x200y200
g0x0y0


then i pressed feed hold during the g0x200y200
when i tryed to start again got he following errormessage:

Fri - 13:53:40 ---Command too long , Block = G0 X21044981090020823000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000.0000 Y-518.5300 Z-205.0500 A-4962710013563463000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000.0000 B0.0000 C0.0000Line 0

Thomas

M3 v .022
anything is possible, just try it.
if you find some mistakes, in my bad bavarian english,they are yours.