Hello Guest it is June 19, 2019, 11:49:50 AM

Author Topic: JNC 40M Ver. 1.49 driver  (Read 1409 times)

0 Members and 1 Guest are viewing this topic.

JNC 40M Ver. 1.49 driver
« on: March 09, 2018, 10:09:30 AM »
Can anyone please tell me where I can find driver downloads for the JNC 40M boards. I have searched all over and cannot find anything. If you wish you can contact me directly at mahaffeytim@gmail.com.

Offline Tweakie.CNC

*
  • *
  •  7,815 7,815
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: JNC 40M Ver. 1.49 driver
« Reply #1 on: March 10, 2018, 01:52:59 AM »
If it's any help I have a copy of the JNC-40M ver.1.42 setup.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: JNC 40M Ver. 1.49 driver
« Reply #2 on: March 10, 2018, 07:25:30 AM »
thanks but I have 1.45 and 1.58 and they don't work, I think I am going to replace the board with something that has some sort of tec support when there is a problem. Any suggestions , needs to work with a 64bit windows system.

Offline Tweakie.CNC

*
  • *
  •  7,815 7,815
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: JNC 40M Ver. 1.49 driver
« Reply #3 on: March 10, 2018, 07:32:36 AM »
I use an ESS Smooth Stepper with one machine https://warp9td.com/ and a 57CNC on another machine
https://www.poscope.com/product/pokeys57cnc/ - both have excellent support and backup.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: JNC 40M Ver. 1.49 driver
« Reply #4 on: March 10, 2018, 08:55:13 AM »
Thanks