Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: tupper on March 09, 2018, 10:09:30 AM

Title: JNC 40M Ver. 1.49 driver
Post by: tupper on March 09, 2018, 10:09:30 AM

Can anyone please tell me where I can find driver downloads for the JNC 40M boards. I have searched all over and cannot find anything. If you wish you can contact me directly at mahaffeytim@gmail.com.

Title: Re: JNC 40M Ver. 1.49 driver
Post by: Tweakie.CNC on March 10, 2018, 01:52:59 AM

If it's any help I have a copy of the JNC-40M ver.1.42 setup.

Tweakie.

Title: Re: JNC 40M Ver. 1.49 driver
Post by: tupper on March 10, 2018, 07:25:30 AM

thanks but I have 1.45 and 1.58 and they don't work, I think I am going to replace the board with something that has some sort of tec support when there is a problem. Any suggestions , needs to work with a 64bit windows system.

Title: Re: JNC 40M Ver. 1.49 driver
Post by: Tweakie.CNC on March 10, 2018, 07:32:36 AM

I use an ESS Smooth Stepper with one machine https://warp9td.com/ and a 57CNC on another machine
https://www.poscope.com/product/pokeys57cnc/ - both have excellent support and backup.

Tweakie.

Title: Re: JNC 40M Ver. 1.49 driver
Post by: tupper on March 10, 2018, 08:55:13 AM

Thanks