Hello Guest it is December 07, 2019, 07:10:20 PM

Author Topic: Mach3 jog  (Read 527 times)

0 Members and 1 Guest are viewing this topic.

Offline TPS

*
  •  1,415 1,415
    • View Profile
Mach3 jog
« on: February 20, 2018, 10:55:00 AM »
Hi,

as soon i enable in Config -> Ports&Pins -> Inputs one of the Jog Inputs,
this Input let me jog always, doesn' matter wether jog mode is enabled or not.

General Config persistent Jog mode is disabled.

is there somewere else a config do allow Jogging only when jog mode is on?

Thank You Thomas
anything is possible, just try it.
if you find some mistakes, in my bad bavarian english,they are yours.