Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: TPS on February 20, 2018, 10:55:00 AM

Title: Mach3 jog
Post by: TPS on February 20, 2018, 10:55:00 AM

Hi,

as soon i enable in Config -> Ports&Pins -> Inputs one of the Jog Inputs,
this Input let me jog always, doesn' matter wether jog mode is enabled or not.

General Config persistent Jog mode is disabled.

is there somewere else a config do allow Jogging only when jog mode is on?

Thank You Thomas