Hello Guest it is March 19, 2024, 06:30:23 AM

Author Topic: Pulse Frequency drops and motors don't work properly  (Read 1467 times)

0 Members and 1 Guest are viewing this topic.

Pulse Frequency drops and motors don't work properly
« on: February 12, 2018, 02:46:33 PM »
My motors work for about 15 seconds then the pulse frequency drops from @29000 to 1000 and is erratic from there. Windows XP.

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Pulse Frequency drops and motors don't work properly
« Reply #1 on: February 12, 2018, 03:14:05 PM »
What are all the specs on the PC?
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline ozzey

*
  •  45 45
    • View Profile
Re: Pulse Frequency drops and motors don't work properly
« Reply #2 on: February 16, 2018, 06:43:05 AM »
i have the same problem was working good for 12 months now starting to play up must be sum thing in the PC that controls the pulse