Hello Guest it is November 20, 2019, 09:59:40 PM

Author Topic: MACH3PLASMA LIMIT SWITCHES FOR G540/PROMA  (Read 12890 times)

0 Members and 1 Guest are viewing this topic.

Offline TPS

*
  •  1,407 1,407
    • View Profile
Re: MACH3PLASMA LIMIT SWITCHES FOR G540/PROMA
« Reply #190 on: February 28, 2018, 02:31:22 PM »
deleted N100 toolchange not necesary.

sorry i modified N100 to N100 F80 to Keep the fedrate



Does the tool change code matter? It’s being generated by itself, but in MACH, my “ignore tool change” setting is checked. It has never been an issue

who knows ?
anything is possible, just try it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: MACH3PLASMA LIMIT SWITCHES FOR G540/PROMA
« Reply #191 on: February 28, 2018, 02:33:12 PM »
So leave THC on, and inputs active, but physically remove the inputs into my g540?

but disconnect only THC UP/Down inputs

Did this, everytbing is running smooth other than the proma actually making the inputs

Offline TPS

*
  •  1,407 1,407
    • View Profile
Re: MACH3PLASMA LIMIT SWITCHES FOR G540/PROMA
« Reply #192 on: February 28, 2018, 02:34:50 PM »
Did this, everytbing is running smooth other than the proma actually making the inputs

can you please explain did not get this, sorry thats my bad english
anything is possible, just try it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: MACH3PLASMA LIMIT SWITCHES FOR G540/PROMA
« Reply #193 on: February 28, 2018, 02:38:28 PM »
I did what you said and it runs smooth but it’s  not actually controlling the Z height.

Offline Davek0974

*
  •  2,580 2,580
    • View Profile
    • DD Metal Products Ltd
Re: MACH3PLASMA LIMIT SWITCHES FOR G540/PROMA
« Reply #194 on: February 28, 2018, 02:39:29 PM »
deleted N100 toolchange not necesary.

sorry i modified N100 to N100 F80 to Keep the fedrate



Does the tool change code matter? It’s being generated by itself, but in MACH, my “ignore tool change” setting is checked. It has never been an issue

It shouldn't but in light of odd things going on, any odd code should be pulled i think just until its all working at least.
Bridgeport Mill, Mach3 V062, CSMIO-IP/A controller, AC Servo Drives

Offline TPS

*
  •  1,407 1,407
    • View Profile
Re: MACH3PLASMA LIMIT SWITCHES FOR G540/PROMA
« Reply #195 on: February 28, 2018, 02:39:54 PM »
ok that means we know now that proma is sending z-axis down.
anything is possible, just try it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: MACH3PLASMA LIMIT SWITCHES FOR G540/PROMA
« Reply #196 on: February 28, 2018, 03:14:10 PM »
So maybe it’s a setting in my PROMA. I can’t  think of anything else..?
Re: MACH3PLASMA LIMIT SWITCHES FOR G540/PROMA
« Reply #197 on: February 28, 2018, 04:32:29 PM »
MACH is changing my Z zero on its own after the first m05 code.
Re: MACH3PLASMA LIMIT SWITCHES FOR G540/PROMA
« Reply #198 on: February 28, 2018, 04:34:15 PM »
ok that means we know now that proma is sending z-axis down.

It’s not this, i can watch the PROMA while the code is running, and there’s is no led indicator on the face of the PROMA. It is just simply MACH changing the Z zero before the cut is finished, or when the m05 line is hit.

Offline Davek0974

*
  •  2,580 2,580
    • View Profile
    • DD Metal Products Ltd
Re: MACH3PLASMA LIMIT SWITCHES FOR G540/PROMA
« Reply #199 on: February 28, 2018, 04:45:31 PM »
MACH is changing my Z zero on its own after the first m05 code.

Pretty certain Mach will not be doing it, something else, but not Mach, if it were then nobody would be using it and there are thousands of users.
Bridgeport Mill, Mach3 V062, CSMIO-IP/A controller, AC Servo Drives