Author Topic: NEMA 23 peckerhead  (Read 1190 times)

0 Members and 1 Guest are viewing this topic.

Offline Roaster

  • Active Member
  • Posts: 49
    • View Profile
NEMA 23 peckerhead
« on: February 05, 2018, 12:00:57 AM »
I made some boxes to neaten up the stepper motor wiring, and be able to use 3/8 greenfield conduit to the control box.
It uses a plug connector for a splice block.

Offline Overloaded

  • Global Moderator
  • *
  • Posts: 4,763
    • View Profile
Re: NEMA 23 peckerhead
« Reply #1 on: February 05, 2018, 12:09:20 AM »
Very tidy, and sharp looking as well !
Good job Roaster, thanks for posting.

Regards,
Russ

Offline Roaster

  • Active Member
  • Posts: 49
    • View Profile
Re: NEMA 23 peckerhead
« Reply #2 on: February 05, 2018, 12:25:55 AM »
Here's the STL file if anyone is interested.
Designed using 123D Design
It's slightly different from the picture with the KO a bit lower to clear the mounting screw.

Offline Tweakie.CNC

  • Global Moderator
  • *
  • Posts: 7,637
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: NEMA 23 peckerhead
« Reply #3 on: February 05, 2018, 02:08:44 AM »
Excellent work Roaster.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.