Machsupport Forum

General CNC Chat => Show"N"Tell ( Your Machines) => Topic started by: Roaster on February 05, 2018, 12:00:57 AM

Title: NEMA 23 peckerhead
Post by: Roaster on February 05, 2018, 12:00:57 AM

I made some boxes to neaten up the stepper motor wiring, and be able to use 3/8 greenfield conduit to the control box.
It uses a plug connector for a splice block.

Title: Re: NEMA 23 peckerhead
Post by: Overloaded on February 05, 2018, 12:09:20 AM

Very tidy, and sharp looking as well !
Good job Roaster, thanks for posting.

Regards,
Russ

Title: Re: NEMA 23 peckerhead
Post by: Roaster on February 05, 2018, 12:25:55 AM

Here's the STL file if anyone is interested.
Designed using 123D Design
It's slightly different from the picture with the KO a bit lower to clear the mounting screw.

Title: Re: NEMA 23 peckerhead
Post by: Tweakie.CNC on February 05, 2018, 02:08:44 AM

Excellent work Roaster.

Tweakie.