just have a look into your GCode file, for example the big circle:
N239020G2X0.3354Y-6.0715I-6.0636J0.4566F100.0
N239030G1Z-0.6450
N239040G1X0.1678Y-6.0785
N239050G1X0.0000Y-6.0808
N239060G1X-0.2938Y-6.0737
N239070G1X-0.5870Y-6.0524
N239080G1Z-0.7700F30.0
N239090G2X-6.0636Y-0.4566I0.5870J6.0524F100.0
N239100G1Z-0.6450
N239110G1X-6.0765Y-0.2284
N239120G1X-6.0808Y0.0000
N239130G1X-6.0764Y0.2313
N239140G1X-6.0632Y0.4623
N239150G1Z-0.7700F30.0
N239160G2X-0.6194Y6.0492I6.0632J-0.4623F100.0
N239170G1Z-0.6450
N239180G1X-0.4134Y6.0667
N239190G1X-0.2068Y6.0773
N239200G1X0.0000Y6.0808
N239210G1X0.2950Y6.0736
N239220G1Z-0.7700F30.0
N239230G2X6.0634Y0.4594I-0.2950J-6.0736F100.0
the ist nothing bigger than 6.something Inch
also if you have a look in Standard Screen set (1024 -> tool path) for the
Programm Limits, they are +/- 6.08",
so why should the result be bigger than this ?