Hello Guest it is June 09, 2023, 06:42:45 PM

Author Topic: Lathe Canned Cycles  (Read 2429 times)

0 Members and 1 Guest are viewing this topic.

Lathe Canned Cycles
« on: January 18, 2018, 03:36:19 PM »
Here is a video made by MachMotion that explain the lathe canned cycles usage.  From there you can go to other videos of specific canned cycles

Re: Lathe Canned Cycles
« Reply #1 on: January 18, 2018, 04:03:23 PM »
I looked through every video they offer ( I think) and there are only 2 of the cycles explained in detail.
The Drilling and the Custom G-Code.
Nothing comprehensive regarding the Threading dialog or any of the others.

I may have overlooked it, but am pretty sure there are only the 2 mentioned above.


Re: Lathe Canned Cycles
« Reply #2 on: January 18, 2018, 04:12:10 PM »
Yes but it will save others hours of time learning the nuances of creating job files, renaming, posting only certain parts of the job when developing.  It's a beginning!