Machsupport Forum

Mach Discussion => Mach4 General Discussion => Mach4 Videos => Topic started by: rhtuttle on January 18, 2018, 03:36:19 PM

Title: Lathe Canned Cycles
Post by: rhtuttle on January 18, 2018, 03:36:19 PM
Here is a video made by MachMotion that explain the lathe canned cycles usage.  From there you can go to other videos of specific canned cycles

https://youtu.be/mIPQJgzdX_I (https://youtu.be/mIPQJgzdX_I)
Title: Re: Lathe Canned Cycles
Post by: Overloaded on January 18, 2018, 04:03:23 PM
I looked through every video they offer ( I think) and there are only 2 of the cycles explained in detail.
The Drilling and the Custom G-Code.
Nothing comprehensive regarding the Threading dialog or any of the others.

I may have overlooked it, but am pretty sure there are only the 2 mentioned above.

https://www.youtube.com/user/MachMotionVideo/videos

Regards,
Russ
Title: Re: Lathe Canned Cycles
Post by: rhtuttle on January 18, 2018, 04:12:10 PM
Yes but it will save others hours of time learning the nuances of creating job files, renaming, posting only certain parts of the job when developing.  It's a beginning!