Hello Guest it is June 23, 2024, 05:25:57 PM

Author Topic: How to set tool height question  (Read 1480 times)

0 Members and 1 Guest are viewing this topic.

How to set tool height question
« on: December 22, 2017, 10:15:53 PM »

I just about  got Mach 3 running properly. A couple of issues left.

1. When I touch off the tool on the part, what do I click on to send the height to the tool table? For now I measured the tool off the machine and put it in the tool table.

2. How do I set the soft limits?

I have a G54 question but for another day.



Strange little parts I am making from a 1883 loom!!! Not so hard to make but making a drawing from the part was a PITB!!!lol

« Last Edit: December 22, 2017, 10:19:25 PM by Planobilly »
Re: How to set tool height question
« Reply #1 on: December 23, 2017, 12:55:14 PM »
I solved the issues.