Hello Guest it is June 19, 2019, 01:57:14 AM

Author Topic: Work offsets not being saved  (Read 3078 times)

0 Members and 1 Guest are viewing this topic.

Work offsets not being saved
« on: June 28, 2007, 10:11:59 AM »
My work offsets are not being saved even though MACH3  version .080 says they are being saved.  Am I not holding my mouth right or is there a secret to this?  Thanks.  Mike
Re: Work offsets not being saved
« Reply #1 on: June 28, 2007, 11:04:04 AM »
Did you try changing the settings under the general configs?

Thanks
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: Work offsets not being saved
« Reply #2 on: June 28, 2007, 02:06:30 PM »
Did you try changing the settings under the general configs?

Thanks
Brian


I'll try that this evening.  Thanks.  Mike

Offline Chaoticone

*
  • *
  •  5,506 5,506
  • Precision Chaos
    • View Profile
Re: Work offsets not being saved
« Reply #3 on: June 28, 2007, 02:46:40 PM »
Axis DRO properties, bottom right corner.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Work offsets not being saved
« Reply #4 on: June 29, 2007, 07:49:06 AM »
I tried all the suggestions, nothing worked.  I looked through the files, particullarly mach3mill.xml but could not file the entries that should be modified.  What file(s) are modified for tools and work offsets?  Thanks.  Mike
Re: Work offsets not being saved
« Reply #5 on: June 29, 2007, 11:16:45 AM »
Fixture.dat is the file that the offsets are saved in...

Also please get the latest version and see if that will fix your problem

Thanks
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: Work offsets not being saved
« Reply #6 on: July 02, 2007, 11:08:46 AM »
Problem was that box was checked was "copy g54 from g59.253 on startup".  Unchecked that and things were fine.  Thanks to all.  Mike
Re: Work offsets not being saved
« Reply #7 on: July 02, 2007, 07:11:23 PM »
P38nut, This is just another suggestion ! Don't get in the habbit of using g54 in your programs, reason being is that I leave g54 in machine dim or zero'd out and insure that g59.253 is also zero'd and then when i start machine or need to touch off an odd tool, I can turn on g54 for that purpose then back to the WPO i'm using ! Make sense ?
CRUISER
  Don