Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: p38nut on June 28, 2007, 10:11:59 AM
-
My work offsets are not being saved even though MACH3 version .080 says they are being saved. Am I not holding my mouth right or is there a secret to this? Thanks. Mike
-
Did you try changing the settings under the general configs?
Thanks
Brian
-
Did you try changing the settings under the general configs?
Thanks
Brian
I'll try that this evening. Thanks. Mike
-
Axis DRO properties, bottom right corner.
Brett
-
I tried all the suggestions, nothing worked. I looked through the files, particullarly mach3mill.xml but could not file the entries that should be modified. What file(s) are modified for tools and work offsets? Thanks. Mike
-
Fixture.dat is the file that the offsets are saved in...
Also please get the latest version and see if that will fix your problem
Thanks
Brian
-
Problem was that box was checked was "copy g54 from g59.253 on startup". Unchecked that and things were fine. Thanks to all. Mike
-
P38nut, This is just another suggestion ! Don't get in the habbit of using g54 in your programs, reason being is that I leave g54 in machine dim or zero'd out and insure that g59.253 is also zero'd and then when i start machine or need to touch off an odd tool, I can turn on g54 for that purpose then back to the WPO i'm using ! Make sense ?