Hello Guest it is March 29, 2024, 12:57:52 AM

Author Topic: coming back from an "out of limits" state  (Read 1577 times)

0 Members and 1 Guest are viewing this topic.

Offline ozo

*
  •  1 1
    • View Profile
coming back from an "out of limits" state
« on: November 03, 2017, 05:39:48 AM »
hello im new user with new machine from acctek china
as i wrote , i moved the y axis all way to the end and now its stuck and i dont know i to reset it...
the x and z axis are moving free...
thanks, oz...
Re: coming back from an "out of limits" state
« Reply #1 on: November 03, 2017, 09:51:51 AM »
Hi,
<Limit Overide> will allow you to jog away from that situation. The bigger question is how you got into that state?

http://www.machsupport.com/wp-content/uploads/2013/02/Mach3Mill_Install_Config.pdf
http://www.machsupport.com/wp-content/uploads/2013/02/Mach3Mill_1.84.pdf

Craig
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'