Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: ozo on November 03, 2017, 05:39:48 AM

Title: coming back from an "out of limits" state
Post by: ozo on November 03, 2017, 05:39:48 AM

hello im new user with new machine from acctek china
as i wrote , i moved the y axis all way to the end and now its stuck and i dont know i to reset it...
the x and z axis are moving free...
thanks, oz...

Title: Re: coming back from an "out of limits" state
Post by: joeaverage on November 03, 2017, 09:51:51 AM

Hi,
<Limit Overide> will allow you to jog away from that situation. The bigger question is how you got into that state?

http://www.machsupport.com/wp-content/uploads/2013/02/Mach3Mill_Install_Config.pdf (http://www.machsupport.com/wp-content/uploads/2013/02/Mach3Mill_Install_Config.pdf)
http://www.machsupport.com/wp-content/uploads/2013/02/Mach3Mill_1.84.pdf (http://www.machsupport.com/wp-content/uploads/2013/02/Mach3Mill_1.84.pdf)

Craig