Hello
Guest
it is
April 26, 2024, 03:18:13 PM
Guest
Login
Register
Menu
Home
Help
Search
Calendar
Members
Members
View the memberlist
Search For Members
Login
Register
YouTube
Machsupport Forum
/
Mach Discussion
/
General Mach Discussion
/
axis won't stop at home limits (but they do lite up at the DIAGNOSTICS screen)
« previous
next »
Print
Pages:
1
Go Down
Author
Topic: axis won't stop at home limits (but they do lite up at the DIAGNOSTICS screen) (Read 1386 times)
0 Members and 1 Guest are viewing this topic.
javier
3
axis won't stop at home limits (but they do lite up at the DIAGNOSTICS screen)
«
on:
September 24, 2017, 01:17:24 PM »
Hi everybody,
My name is Javier and I live in Barcelona. I am very new to cnc, so new that I still couldn't start using my machine. I bought a 900 mm by 1400 mm 3 axis router just for drilling small countersunk orifices in aluminum posts but it is taking me forever to get it up and running.
The last hurdle I stumbled upon is that I cannot "HOME" to the limit switches. It just doesn't stop by then.
I can see in the diagnostics screen that the limits "lite up" when the axis arrives to them but it just ignores them and bumps at the end of the run.
The very odd thing is that if I "emulate" the switches, it homes perfectly at the points at which I press the designated emulating key.
Any leads?
Thanks in advance, I have been stuck here for over a week now.
Logged
javier
3
Re: axis won't stop at home limits (but they do lite up at the DIAGNOSTICS screen)
«
Reply #1 on:
September 24, 2017, 02:51:32 PM »
solved it,,,,
I had configured the pins x10, y11 and z12 but y and x were inverted and therefore the switches for x and y were in the wrong axis.
thanks anyway, there will be plenty more of issues!
Javier
Logged
Print
Pages:
1
Go Up
« previous
next »