Hello Guest it is April 30, 2025, 02:09:56 PM
Profile Guest

Poll

What is wrong

attitude
0 (0%)
I dont no
0 (0%)

Total Members Voted: 0

« previous next »
Pages: 1   Go Down

Author Topic: Pokeys57CNC Motor Not move  (Read 10395 times)

0 Members and 1 Guest are viewing this topic.

Offline Bastler

*
  • 1 1
Pokeys57CNC Motor Not move
« on: August 26, 2017, 02:41:06 PM »
I have Mach3, the latest version as a demo and the plugin of Pokey's website. Had a connection between Pokeys and Mach3. If I start Mach3 have the motors current but they do not move. Sorry for the english, google translator
« Last Edit: August 26, 2017, 02:46:01 PM by Bastler »
Logged

Offline Greeny01

*
  • 2 2
Re: Pokeys57CNC Motor Not move
« Reply #1 on: June 02, 2022, 02:52:13 PM »
When testing homing & limits everything works great. When I install any test program the x axis motor moves about an inch and stops . I have tried this independantly for the x-axis, the y-axis as well as the z-axis and all stepper motors did the same thing. moved about an inch. Any ideas?
Logged
Pages: 1   Go Up
« previous next »