Machsupport Forum

Third party software and hardware support forums. => PoKeys => Topic started by: Bastler on August 26, 2017, 02:41:06 PM

Title: Pokeys57CNC Motor Not move
Post by: Bastler on August 26, 2017, 02:41:06 PM

I have Mach3, the latest version as a demo and the plugin of Pokey's website. Had a connection between Pokeys and Mach3. If I start Mach3 have the motors current but they do not move. Sorry for the english, google translator

Title: Re: Pokeys57CNC Motor Not move
Post by: Greeny01 on June 02, 2022, 02:52:13 PM

When testing homing & limits everything works great. When I install any test program the x axis motor moves about an inch and stops . I have tried this independantly for the x-axis, the y-axis as well as the z-axis and all stepper motors did the same thing. moved about an inch. Any ideas?