Hello Guest it is November 18, 2019, 11:42:25 PM

Author Topic: Mach issue or Hicon??  (Read 1213 times)

0 Members and 1 Guest are viewing this topic.

Mach issue or Hicon??
« on: August 12, 2017, 06:45:24 AM »
I am very close to having my retrofit done but have encountered a problem that I cannot find the answer to and do not know if it is Mach related or Hicon related While doing the Mach 4 config, I did not set any of my homing offsets and on searching, cannot find a place to set them in Hicon! When I jog, mdi or reference individually or ref all, every axis except the tool carousel offsets and the only one I have really paid attention to is the y axis since it is the only axis that is used other than the carousel to do a tool change!

I made sure the home on index pulse tic box was unchecked to take that out of the loop for now. I still get offset on homing and the home offsets have not be set in config@ Now we are not talking offset enough to get off the sensor! The y axis measures  -.178"

Anyone?

Mike

ps I have other issues but will post each separately!
« Last Edit: August 12, 2017, 03:44:21 PM by Vital System Support »