Hello Guest it is March 28, 2024, 07:30:49 AM

Author Topic: Pulse rate too fast  (Read 1468 times)

0 Members and 1 Guest are viewing this topic.

Pulse rate too fast
« on: July 23, 2017, 04:57:21 PM »
Hi everyone,
I'm new to mach3. During installation I ran the driver test and saw a message that the pulse rate was "too fast". Does this mean that mach will not run properly? If I must fix it where do I look to resolve this issue? Any help will be appreciated.

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Pulse rate too fast
« Reply #1 on: July 23, 2017, 05:26:10 PM »
What is the pulse rate, and how steady is it?
Do you get a smooth, flat line?
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Pulse rate too fast
« Reply #2 on: July 23, 2017, 06:35:26 PM »
the line is flat. rate is 28000 or so. the bar that in the instructions and show "excellent" is where mine says pulse rate too fast