Hello Guest it is December 06, 2019, 02:39:58 AM

Author Topic: No Bug Fix For Angle Of Rotation G68 With Reverse Run ?  (Read 740 times)

0 Members and 1 Guest are viewing this topic.

No Bug Fix For Angle Of Rotation G68 With Reverse Run ?
« on: July 09, 2017, 10:36:12 PM »
As topic shown, after rotate the toolpath , reverse run will make machine go somewhere , no fix anymore ?

Offline Tweakie.CNC

*
  • *
  •  8,010 8,010
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: No Bug Fix For Angle Of Rotation G68 With Reverse Run ?
« Reply #1 on: July 10, 2017, 01:43:33 AM »
There are a number of functions (dependent on the particular version of Mach3 being used) that do not operate as expected when G68 is in operation.
As future development of Mach3 has ceased in favor of Mach4 it is unlikely that a direct 'fix' will be available.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: No Bug Fix For Angle Of Rotation G68 With Reverse Run ?
« Reply #2 on: July 10, 2017, 03:05:51 AM »
Thanks Tweakie

Offline rcaffin

*
  •  1,007 1,007
    • View Profile
Re: No Bug Fix For Angle Of Rotation G68 With Reverse Run ?
« Reply #3 on: July 12, 2017, 07:09:35 PM »
The real answer, imho, is   Don't use Reverse Run.
It never worked all that well, and was a really bad idea.

Cheers
Roger