I haven't even got my lathe up and running; i'm just getting it setup. I'd get random estops occasionally, now it trips instantly. I've attached the log file. I think maybe my CNC4PC M16 BOB is bad or my Pokeys 57E? Seems like it's getting an estop trigger from the motion controller; or as it looks to me from looking at the log file.
Any help would be appreciated.
2017-02-20 00:27:27.147 - [PoKeys] Switching to RUNNING state...
2017-02-20 00:27:27.147 - Signal id 1018, (Enable #0), changed from HIGH to LOW.
2017-02-20 00:27:27.147 - Signal id 1020, (Enable #2), changed from HIGH to LOW.
2017-02-20 00:27:27.147 - Signal id 1120, (Machine Enabled), changed from HIGH to LOW.
2017-02-20 00:27:27.162 - [PoKeys] PoKeys Pulse engine disabled
2017-02-20 00:27:27.162 - [PoKeys] Disabling motion - Buffer with 15 moves is being cleared!
2017-02-20 00:27:27.162 - [PoKeys] Axis enabled changed 0
2017-02-20 00:27:27.178 - [PoKeys] Updating enable output signals
2017-02-20 00:28:02.699 - API: mcCntlEnable(true) called.
2017-02-20 00:28:02.699 - Signal id 1018, (Enable #0), changed from LOW to HIGH.
2017-02-20 00:28:02.699 - Signal id 1020, (Enable #2), changed from LOW to HIGH.
2017-02-20 00:28:02.699 - Signal id 1120, (Machine Enabled), changed from LOW to HIGH.
2017-02-20 00:28:02.699 - [PoKeys] Axis enabled changed 5
2017-02-20 00:28:02.699 - [PoKeys] Updating enable output signals
2017-02-20 00:28:02.715 - [PoKeys] PoKeys Pulse engine enabled
2017-02-20 00:28:02.715 - [PoKeys] Enabling motion - Buffer with 0 moves is being cleared!
2017-02-20 00:28:02.715 - [PoKeys] Updating motion parameters in device
2017-02-20 00:28:02.715 - All motors marked as still.
2017-02-20 00:28:02.715 - All motors marked as still.
2017-02-20 00:28:02.715 - All motors marked as still.
2017-02-20 00:28:02.715 - All motors marked as still.
2017-02-20 00:28:02.715 - API: mcMotionSync() called.
2017-02-20 00:28:02.715 - SyncPosition()! Clearing planner.
2017-02-20 00:28:02.715 - [PoKeys] Switching to RUNNING state...
2017-02-20 00:28:04.727 - API: mcCntlEStop() called.
2017-02-20 00:28:04.727 - API: mcCntlEnable(false) called.
2017-02-20 00:28:04.727 - API: mcMotionClearPlanner() called.
2017-02-20 00:28:04.727 - API: mcAxisDerefAll()
2017-02-20 00:28:04.727 - API: mcAxisDeref() called. axis 0
2017-02-20 00:28:04.727 - API: mcAxisDeref() called. axis 1
2017-02-20 00:28:04.727 - API: mcAxisDeref() called. axis 2
2017-02-20 00:28:04.727 - Signal id 1018, (Enable #0), changed from HIGH to LOW.
2017-02-20 00:28:04.727 - API: mcAxisDeref() called. axis 3
2017-02-20 00:28:04.727 - API: mcAxisDeref() called. axis 4
2017-02-20 00:28:04.727 - API: mcAxisDeref() called. axis 5
2017-02-20 00:28:04.727 - API: mcAxisDeref() called. axis 6
2017-02-20 00:28:04.727 - API: mcAxisDeref() called. axis 7
2017-02-20 00:28:04.727 - API: mcAxisDeref() called. axis 8
2017-02-20 00:28:04.727 - Signal id 1020, (Enable #2), changed from HIGH to LOW.
2017-02-20 00:28:04.727 - API: mcAxisDeref() called. axis 9
2017-02-20 00:28:04.727 - API: mcAxisDeref() called. axis 10
2017-02-20 00:28:04.727 - API: mcAxisDeref() called. axis 11
2017-02-20 00:28:04.727 - API: mcCntlMachineStateClear() called.
2017-02-20 00:28:04.727 - [PoKeys] E-stop due to emergency
2017-02-20 00:28:04.727 - [PoKeys] Switching to RUNNING state...
2017-02-20 00:28:04.727 - Signal id 1120, (Machine Enabled), changed from HIGH to LOW.
2017-02-20 00:28:04.743 - [PoKeys] PoKeys Pulse engine disabled
2017-02-20 00:28:04.743 - [PoKeys] Disabling motion - Buffer with 12 moves is being cleared!
2017-02-20 00:28:04.743 - [PoKeys] Axis enabled changed 0
2017-02-20 00:28:04.758 - [PoKeys] Updating enable output signals
2017-02-20 00:28:13.978 - Signal id 164, (E-Stop), changed from LOW to HIGH.
2017-02-20 00:28:13.978 - API: mcCntlEStop() called.
2017-02-20 00:28:13.978 - API: mcCntlEnable(false) called.
2017-02-20 00:28:13.978 - Signal id 164, (E-Stop), changed from HIGH to LOW.
2017-02-20 00:28:13.978 - [PoKeys] PoKeys Pulse engine disabled