Hello Guest it is November 06, 2024, 01:25:17 AM

Author Topic: Mach 3 axis problem..pl. help  (Read 1492 times)

0 Members and 1 Guest are viewing this topic.

Mach 3 axis problem..pl. help
« on: January 28, 2017, 04:31:36 AM »
I'm using a simple 3 axis machine run on mach 3. I have a problem in y axis( 2 stepper motors). Everything is fine when i do mannual jogging. But when i start a g code, one of the motors stop, showing an error indication on the stepper drive. if i stop the program and try to jog, it doesn't work. If i restart the machine all the motors become active. pl.help