Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Titus on January 28, 2017, 04:31:36 AM

Title: Mach 3 axis problem..pl. help
Post by: Titus on January 28, 2017, 04:31:36 AM
I'm using a simple 3 axis machine run on mach 3. I have a problem in y axis( 2 stepper motors). Everything is fine when i do mannual jogging. But when i start a g code, one of the motors stop, showing an error indication on the stepper drive. if i stop the program and try to jog, it doesn't work. If i restart the machine all the motors become active. pl.help