Hello Guest it is November 27, 2021, 02:44:46 AM

Author Topic: Mach3 machine jogging when reset button is on  (Read 1129 times)

0 Members and 1 Guest are viewing this topic.

Mach3 machine jogging when reset button is on
« on: January 24, 2017, 03:28:13 AM »
Hi, need help please. my machine is jogging/juttering when i press the reset button. this is when the machine should not be doing anything. as soon as i press it again it stops and the system is on. what is going wrong. any help on settings using 5 axis breakout board and nema 23 285oz

thanks
Hi. Any one know why all the motors are jogging in the right direction on all the xis however when you run a programme x and y only run one way. Confusing.