Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: meady638 on January 24, 2017, 03:28:13 AM
-
Hi, need help please. my machine is jogging/juttering when i press the reset button. this is when the machine should not be doing anything. as soon as i press it again it stops and the system is on. what is going wrong. any help on settings using 5 axis breakout board and nema 23 285oz
thanks
-
Hi. Any one know why all the motors are jogging in the right direction on all the xis however when you run a programme x and y only run one way. Confusing.