Hello Guest it is February 29, 2020, 05:24:28 AM

Author Topic: Work piece outside of table  (Read 732 times)

0 Members and 1 Guest are viewing this topic.

Work piece outside of table
« on: January 06, 2017, 04:07:56 AM »
Hi.I set up machine limits for the table display.but when I input g code the work shows outside the table. I air cut the work and it cut off table.what am I doing wrong.

Offline Davek0974

*
  •  2,580 2,580
    • View Profile
    • DD Metal Products Ltd
Re: Work piece outside of table
« Reply #1 on: January 06, 2017, 06:19:14 AM »
Sounds like the workpiece home reference is set wrong in your CAM program.

Bridgeport Mill, Mach3 V062, CSMIO-IP/A controller, AC Servo Drives