Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: terry1956 on January 06, 2017, 04:07:56 AM

Title: Work piece outside of table
Post by: terry1956 on January 06, 2017, 04:07:56 AM

Hi.I set up machine limits for the table display.but when I input g code the work shows outside the table. I air cut the work and it cut off table.what am I doing wrong.

Title: Re: Work piece outside of table
Post by: Davek0974 on January 06, 2017, 06:19:14 AM

Sounds like the workpiece home reference is set wrong in your CAM program.