Hello Guest it is April 18, 2024, 04:08:56 PM

Author Topic: Continuously run rotating axis in Mach3?  (Read 1389 times)

0 Members and 1 Guest are viewing this topic.

Continuously run rotating axis in Mach3?
« on: December 07, 2016, 02:31:56 PM »
Is it possible to tell Mach3 to continuously to run a rotating axis at a specified speed?

In some cases, it is useful to be able to use a CNC milling machine as a lathe. I have a three axis CNC router with an additional table with two rotational axles. I would like to be able to tell Mach3 to run the B axis continuously at a high speed and at the same time move the other axles at a low speed. The idea is to use the B axis as the spindle in a lathe.

Is it possible to do this, using G-code, VB commands or some other way?

My milling machine looks like this:

Best regards,