is written from the g-code point of view
Because g code is "basic" to any controller.
This needs to be added to what I wrote:
All contollers have commands to control a machine and although
they are rather generic each controller has dilects of G code and even some propriatary ones. The following are basic Mach3 G codes / commands related to Work Offsets.
I tried to capture what is shown in hundreds of pages of the major manufacturing manuals and books.
trying to integrate the two versions, but it is difficult
Just what where does one find coordinate "space" as I don't remember ever seeing that in all the cnc material I studied. Coordinates / planes/ etc. are all mathematical based.Sorry i am just having problems with the "space" terminology......that's why your having trouble integrating maybe.
Keep working at it...it's your write up.
You wouldn't happen to have the sources for the pics you used by any chance
I drew them myself in cad to pictorialy show what was written.
including your write-up as a Part 2 in the doc: 'the view from the g-code side' as it were.
Put it where you want ( not there my friend
) ..........it's your write up. RICH is fine.
a couple of the diagrams might be useful if you want to make them available.
Diagrams for what? Can you be more specific?
RICH