Hello Guest it is March 29, 2024, 10:50:24 AM

Author Topic: Best method to test for servo faults  (Read 1622 times)

0 Members and 1 Guest are viewing this topic.

Best method to test for servo faults
« on: September 10, 2016, 08:30:24 AM »
Hi all
Last year I did a complete rebuild of my control box for my wood router. I was wondering what`s the best way to
test for servo faults. My new system has a 70 volt power supply that runs with Geckos and 600 oz-in servo motors.
The machine seems more reliable and is faster. But I`d like to test it to see what the maximum ipm would be.
Not certain what the best type of g-code would be to check the machine.

Barry
« Last Edit: September 10, 2016, 08:39:08 AM by golash »

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Best method to test for servo faults
« Reply #1 on: September 10, 2016, 11:55:17 AM »
Jogging at full rapid is the way I test.
Hood