Hello Guest it is March 28, 2024, 08:54:33 PM

Author Topic: C25S to smoothstepper no go  (Read 1603 times)

0 Members and 1 Guest are viewing this topic.

C25S to smoothstepper no go
« on: August 25, 2016, 09:33:56 PM »
Has anyone had problems plugging a C25S BOB to the ESS smoothstepper board.  It's an excessive tight fit and it won't go all the way down due to the Ethernet housing in the way.  I'm thinking now I may need to use a couple 30 pin daisy chain cables.

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: C25S to smoothstepper no go
« Reply #1 on: August 26, 2016, 01:37:31 AM »
The C25 fitted the ESS just fine but the C25S is not quite correct dimensionally - it sort of fits  :)

Tweakie.
PEACE
Re: C25S to smoothstepper no go
« Reply #2 on: August 26, 2016, 06:18:02 AM »
The C25 fitted the ESS just fine but the C25S is not quite correct dimensionally - it sort of fits  :)

Tweakie.

Yeah I figured it was something like that.  I'm going to try using two 30 pin computer ribbon cables connect it.