Hi
I'm trying to get started writing some macros of my own. As a starting point I'm writing some simple g-code and running that like any normal job but the variables don't seem to be working. I've a really simple example below, define x, y and z coordinates as variables and then move to that location but when I run the job the machine simply moves to 0,0,0?
I'm running Mach 4. Suggestions on a postcard?
N000 G00G21G17G90G40G49G80
N010 G91.1
N020 G94
N030 #1001=75.0
N040 #1002=57.5
N050 #1003=-20
N060 G0 X#1001 Y#1002 Z#1003