Hello Guest it is November 20, 2019, 11:01:02 PM

Author Topic: DRO'S  (Read 863 times)

0 Members and 1 Guest are viewing this topic.

Offline PCH

*
  •  63 63
    • View Profile
DRO'S
« on: June 27, 2016, 04:26:52 PM »
My pc did an upgrade to windows 10 and now dro's show movement but
the cnc does not respond when I jog.
Should I revert back to Windows 7 or is there a fix for Windows 10? :-[

Offline mc

*
  •  381 381
    • View Profile
Re: DRO'S
« Reply #1 on: June 27, 2016, 04:40:11 PM »
If you are using the parallel port, then you'll need to revert to Windows 7 (32bit).

If you're using an external motion controller, then you'll need to check you have a signed driver suitable for Windows 10.

Offline PCH

*
  •  63 63
    • View Profile
Re: DRO'S
« Reply #2 on: June 27, 2016, 04:45:11 PM »
Just got that figured out.  I did revert back as I do have a parallel port.

thanks for getting back to me